Aves Apoxie Sculpt – Modelling Compound 1lb Kit in Super White

Aves Apoxie Sculpt - Modelling Compound 1lb kit in Super White –  (Base Colour –  White).

Super White Apoxie® Sculpt combines the features and benefits of sculpting clay with the adhesive power of epoxy. It has a firm/fine grain consistency and crisp white colour that allows more details to be seen.

Its smooth, putty-like consistency is easy to mix and use. Self-hardening (No Baking); has a working time of about two hours, cures hard in 24 hours to a semi-gloss finish. Adheres to nearly any surface and is great for sculpting, embellishing, bonding and filling most anything.

Accepts paints, stains, mica powders and more for a variety of finishing options. Sand, tap, drill, carve, lathe, etc. after set-up without chipping, cracking or flaking. Exterior Quality and can be used in many outdoor applications

With absolutely no shrinkage Apoxie Sculpt adheres to any clean surface. It is perfect for sculpting, taxidermy finish work, repairing shrunken areas and wood carving repairs. The durable flat finish makes repairs and painting easier with any kind of paint.

Discover unlimited uses!

• Self-Hardening
• Putty-like consistency
• 1-3 hour working time
• Highly Adhesive
• Superior Detail
• 0% Shrinkage & Cracking
• Hard & Durable
• Semi-gloss finish
• Waterproof
• Non-flammable
• Marine & Exterior Quality
• Freeze-thaw Stable
• 12 Vibrant Colors: Natural, White, Black, Brown, Orange, Yellow, Green, Blue, Red, Pink, Silver-Grey-Grey, Bronze to mix & match!.
• Adheres to: Itself (in any stage of set-up before or after curing), other epoxies, Ceramic, Metal, Wood, Stone, Glass, Plastics, Foam, Fiberglass, Polymers, & more!

Directions:

1. Wear disposable gloves to measure equal parts of A & B. Always retrieve parts A & B with different tools.
2. Mix & knead together for 2 minutes until thoroughly combined and a uniform colour is achieved. Note incomplete mixing will give poor results. *Allow mixed product to rest 5 minutes for better handling.
3. Apoxie® Sculpt is ready to use; working time is 1- 3 hours. Shape as desired. Smooth or texture with a wet finger, brush, Q-tip or sculpting tool. Self-hardens (NO BAKING); 24 hour full cure.
4. Clean up: soap & water or Aves® Safety Solvent (very helpful for smoothing, removing finger prints & cleaning up pigment / product residue before set-up). Finish as desired. Paint wet or dry. Marine & Exterior Quality!

Safe Handling:

• Wear protective gloves [e.g., nitrile or equivalent] when combining parts A and B.
• Wear a dust mask and safety glasses when sanding cured product.
• Keep out of reach of children.
• Safe for adults when used as directed.
• 24 hr. full cure required for hard finishing purposes such as sanding, carving, drilling, machining, etc., without chipping, cracking or flaking.
• Keep containers sealed when not in use.
• Freeze-Thaw-Stable.

Working Time - A Guide:

• 1/2 hour: Sticky & most adhesive
• 1 to 2 hours: Easy to work with
• 2 to 3 hours: Setting up, form-able detail
• 24 hours: Hard, cured & waterproof

There are 12 different colours of Apoxie® Sculpt that you can mix & match. Mix Super White Apoxie® with regular Apoxie for more colour blending options.